Serpent now offers their electric S411 touring car in a Sport model. Check out all the features in the press release below:
Sport type, club level 1/10 scale 190mm electric powered touring car. 4 wheel-belt-drive, RCM hydraulic shocks, front nylon spool, rear gear diff, independent suspension, black glass-fiber shock towers, chassis and top-deck. Fully upgradable to race spec. No electronics, tires/wheels, or body included.
Chassis
Super narrow, symmetrical , durable black glass-fiber chassis plate with optimized flex design, countersunk holes, central section holes all perfectly in center, pockets for, spool and spur.
Top deck
- Durable black glass-fiber top deck with optimized flex design.
- Battery-mount brackets and Lipo-holders
- Easy to use nylon batter tape holder, which allow the battery tape to run over instead of under the chassis. The holders can be reversed for other battery position. The Lip holders will securely keep the Lipo in place, also at hard impact.
Servo-mount
The servo is mounted on a separate plate, so flex is less influenced.
Shock tower front
Black glass fiber shock tower with 3 upper shock mounting holes to choose from . Holes for an extra central body post are already made as well.
Front bracket
Machined aluminum front brackets, with belt tension adjusting through extenders. Suspension brackets in durable nylon.
Front suspension
Durable lower front wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.
C-hub / steering block
The c-hub type front system creates a super precise steering feeling with great feedback, and strong wheel guidance without chatter.
Shock tower rear
Black glass fiber shock tower with 4 upper shock mounting holes to choose from . The rear body posts are mounted to the top of the rear shock tower.
Rear bracket
Machined aluminum rear brackets, with belt tension adjusting through extenders. Suspension brackets in durable nylon with 3.0 RR RR and split type 0.0 blocks RR FR
Rear suspension
Durable lower rear wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.
Rear upright
Strong rear uprights with 2 upper positions, for perfect guidance of the rear wheels.
Motor mount
Machined aluminum motor mount / middle shaft support.
Middle shaft
Balanced middle shaft with 2 small pulleys and the main Serpent spur gear.
Bumper
Large foam front bumper captured by a upper and lower nylon bumper
Body mount
Front body mount is mounted through the front bumper, and the rear ones are seated on the shock tower. Multiple body position holes to choose from.
Gear-diff
Very compact balanced gear differential in the rear, with steel gears and axles for durability. Super smooth.
Spool
Front nylon lightweight spool with screw mounted front gear pulley
Transmission / belts / pulleys
Smooth low friction fine pitch belts combined with optimized nylon pulleys
Driveshaft / wheel hex / wheel axle
Steel drive shafts, combined with balanced wheel axles and nylon wheel-hex adaptors
Steering system
Steering system with optimized ackermann for neutral steering-feeling.
Shock absorbers
Latest type RCM competition shock absorbers with membranes and checked color-coded race springs.
Ball-bearings
Fully balanced with oiled high speed sealed stainless steel bearings.
Manual and decals:
Full color assembly manual which shows clearly all assembly steps, has all exploded views for easy parts-finding and detailed list with spare and option parts. Decal-sheet with Serpent and 411 logos are included as well.
Packing
The 411 Sport comes in a strong small carton box with full color printing.
Options / upgrading
The Serpent 411 Sport is based on the high end race version of the 411. All parts from the 411 race-version and also all options, also fit the 411 Sport. This allows you to upgrade your 411 Sport to a higher level race spec step by step, with the parts you select. The 411 Sport parts manual shows those parts, and you can find them in the options section of the 411 Sport as well.
#400006
[nggallery id=882]
If you like this article, check out this additional article on Serpent.
The post Serpent S411 190mm Sport Edition appeared first on RC Car Action.
