Schelle Kit to Shorten Your Team Associated B64’s Wheelbase
Product News Team Associated

Schelle Kit to Shorten Your Team Associated B64’s Wheelbase

30 November, 2017

From Schelle Racing Innovations:

Get the hottest “team” modification parts for your B64 to shorten the wheelbase 2mm. Shortened wheelbase does 2 main things for handling.

(1) increase rear weight bias, giving more traction in the turns and typically more predictable on exit.
(2) increase weight transfer on power, giving better drive to exit the turns.

Short Wheelbase Parts Kit includes:

  • -2mm cut B64 rear arms (std kit material)
  • 2mm 3d printed pin spacer
  • 7mm 3d printed standoff
  • 30mm shock screws

Instructions:

  1. Remove kit arms, install cut arms with kit 1mm shim and included 2mm shim behind the arm.
  2. Remove shock standoff and replace screw with 30mm shock screw, adding the 7mm plastic spacer before the standoff.
  3. If desired, you may flip the upper link ballstud to the front of the rear tower, this reduces side-load on the ball joints and helps the suspension operate with less binding.
  4. Re-set ride height before running. Do not adjust droop.

#SCH1394 – $16.00
See more posts about Schelle Racing Innovations
Visit SchelleRacing.com

Shorten Your B64's Wheelbase With This New Schelle Kit Shorten Your B64's Wheelbase With This New Schelle Kit

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

The post Schelle Kit to Shorten Your Team Associated B64’s Wheelbase appeared first on RC Car Action.

Trevor Duncan

Engineering leader at a pre-IPO startup