Transform the Way You Fly!
Available Early March
The Inductrix Switch Air is the second member of the Inductrix Switch family, both of which feature a modular, snap together design that’s exclusive to the Blade brand.
It’s literally two models in one, transforming from a micro drone (Quad Mode) into a flying wing (Wing Mode) in seconds using simple stick commands.
No tools or wiring changes are required. You don’t even have to unplug the battery!
It’s easy for beginners and experienced users alike. Even in Wing Mode, the Inductrix Switch Air is perfectly suited for flying indoors in tight areas. No “runway” space is needed.
Thanks to its VTOL (Vertical Takeoff and Landing) capabilities, you simply rise to a hover, then push the sticks forward and start flying. When you’re ready to land, slow and descend like you would with a drone. The Inductrix Switch Air can also be flown outdoors in very light winds.
In both Wing and Quad modes, SAFE® stabilizing technology provides self-leveling flight to give all pilots confidence at the controls. Limited pitch and bank angles prevent over-control.
The modular design of the Blade Inductrix Switch Air is also compatible with that of the Inductrix Switch hovercraft. Add a few optional parts and your Inductrix Switch Air can become a hovercraft, too. Enjoy a third mode of RC action without buying another complete model.
Look for this to be released sometime around early march!
KEY PRODUCT FEATURES:
• Available in Ready-to-Fly and Bind-N-Fly® Basic versions
• Easy to fly indoors
• Durable foam wing design easily survives bumps and crashes
• Converts between Quad and Wing Modes in seconds with simple mounts and stick commands
• Programmable LED lights
MORE FEATURES:
Modular Design The modular design of the Inductrix Switch Air uses the same innovative snap-in motor and flight controller technology as the Inductrix Switch — so you can change components between them and share parts.
SAFE Flight Modes Self-leveling flight modes make flying in Wing Mode or Quad Mode extremely easy. [Note, does not have Panic Recovery Mode.]
VTOL (Vertical Takeoff and Landing) Piloting a fixed-wing model indoors is easy with the VTOL feature of the Inductrix Switch Air. Rise and hover to take off…push forward to fly. When you’re ready to land, slow and descend. It’s that simple, and can be done in limited space.
Optional LEDS Easily add a custom look with the optional LED set. Simply plug into the available port and tape to the airframe. Increase visibility and fun with this easy upgrade.
SPECIFICATIONS:
Material: EPO foam
Wingspan: 13.98 in (35.5 cm)
Flying Weight: 0.95 oz (27g)
Motor Size (EP): 6mm
Prop Size: 1.18 in (30mm)
Approximate Flying Duration: 3-4 minutes
Experience Level: Beginner
COMPLETION ITEMS:
Blade® Inductrix® Switch Air RTF
The Inductrix Switch Air Ready-to-Fly (BLH8300) comes complete with everything needed to fly — the perfect package for first-time modelers eager to get right into action.
Includes:
• Factory-assembled Inductrix Switch Air micro quad/flying wing
• Blade® MLP4 4-channel 2.4GHz DSMX® transmitter
• 1S 25C 150mAh LiPo battery
• USB LiPo charger
• AA transmitter batteries
Blade® Inductrix® Switch Air Bind-N-Fly® Basic
If you already own a compatible 4+ channel DSMX®/DSM2® transmitter, just bind it to the Inductrix Switch Air BNF (BLH8380) model’s factory-installed receiver, add a charged 1S 25C 150mAh LiPo battery, and you’re ready to fly!
REPLACEMENT PARTS:
BLH8301 Wing: Switch Air
BLH8521 Pro Motor Set, (4): Inductrix
BLH8705 Prop Set (4), White: Inductrix
BLH9801 Prop Set(4): Inductrix Switch
BLH9802 FC board: Inductrix Switch
BLH9803 Duct set(2): Inductrix Switch
BLH9804 Main frame: Inductrix Switch
BLH9807 Canopy (red): Inductrix Switch
EFLB1501S25 150mAh 1S 3.7V 25C LiPo Battery
EFLC1008 1S USB Li-Po Char, 300mA
EFLH1064B Blade MLP4DSM4CH TRX,2.4GHzBMCX2
